METAL - International Conference on Metallurgy and Materials

Conference Proceedings - METAL 2020

29th International Conference on Metallurgy and Materials
May 20 - 22, 2020 / Brno, Czech Republic, EU
ISSN: 2694-9296
ISBN: 978-80-87294-97-0
Proceedings of the conference have already been published in Scopus and we are waiting for evaluation and potential indexing in Web of Science.

On the 29th International Conference on Metallurgy and Materials - METAL 2020, 215 people from 19 countries around the world were registered (such as the Czech Republic, Poland, Russian Federation, Slovakia, Lithuania, but also from Chile and Mexico). 226 articles were submitted to the following sections:
Session A - Advanced Iron, Cast Iron and Steelmaking
Session B - Metal Forming
Session C - Steel Products - properties
Session D - Modern Trends in Surface Engineering
Session E - Non-Ferrous Metals and Alloys
Session F - Economics and Management of Metallurgical Production

Read more
BORISOV Evgenii Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russian Federation,
Co-authors: STARIKOV Kirill POPOVICH Anatoly POPOVICH Vera
Abstract: The aim of this study was to determine the influence of selective laser melting (SLM) process parameters on the formation of cracks in nickel-based single crystal alloy. Several sets of laser scanning parameters, with varied laser power, scanning speed and hatch distance, thus resulting in different volumetric and linear energy densities, were investigated. [..] Read more
STANULA Agnieszka Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland, EU,,
Co-authors: PILARCZYK Wirginia JAGER Mark WILK Tomasz
Abstract: The subject of this article is the failed bushing used in the car suspension. The claim of the broken bushing came from the car producer. [..] Read more
LIPIŃSKI Tomasz University of Warmia and Mazury in Olsztyn, Olsztyn, Poland EU,
Co-authors: KARPISZ Dariusz
Abstract: Hypo-eutectic silumins are used in a wide range of industrial applications, but their properties are continuously studied to improve the quality of cast products. The initial structure of AlSi9Mg alloy is composed of granular and acicular β phase, with α phase as matrix. [..] Read more
BROŽOVÁ Silvie VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,
Co-authors: DRÁPALA Jaromír MICZKOVÁ Jana HAVRÁNEK Jaroslav
Abstract: The paper deals with the possibility of obtaining zinc and iron from waste sludge and filter cakes, which are formed during galvanic plating. It contains a theoretical analysis of hydrometallurgical processes. [..] Read more
ONDRÁČEK Jan Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Prague, Czech Republic, *
Co-authors: MATERNA Aleš KARLÍK Miroslav KOVÁŘÍK Ondřej ČECH Jaroslav CIESLAR Miroslav
Abstract: Elastic properties of wound rolls are used as an input for simulations of stress-strain state in the roll after winding in order to optimize quality of foils. The effective elastic modulus in direction perpendicular to the layers of foil is challenging to measure because it is dependent on interlayer pressure and is generally much smaller than the bulk elastic modulus of the material. [..] Read more
DYČKA Martin Brno University of Technology, Central European Institute of Technology, Brno, Czech Republic, EU
Co-authors: JULIŠ Martin KLAKURKOVÁ Lenka DYČKOVÁ Lucie GEJDOŠ Pavel
Abstract: In this article, the intensity of mold metal reactions between ceramic shell and magnesium alloy AZ91E is studied. The two possible protective gasses used for melt protection are studied - SF6 (sulphur hexafluoride) and 3M NOVEC 612. [..] Read more
Menushenkov Vladimir National University of Science and Technology “MISIS”, 119049 Leninskyi pr. 4, Moscow, Russia,
Co-authors: MINKOVA Irina Savchenko Alexander SHCHETININ Igor Zhukov Dmitry MECALA Sandra
Abstract: The effect of high-energy ball milling a mixture of Fe and h-BN with weight ratio of Fe:BN = 15, 4, 1, 0.36 on the phase composition and magnetic properties of the synthesized material has been investigated. High-energy ball milling demonstrated a significant change in the phase content, structure, and magnetic characteristics upon MA and followed annealing at 600 0C, in particular upon annealing, and the coercivity of the MA powder reached HC = 43 kA/m (540 Oe).. [..] Read more
FERDYN Maciej Private person, Katowice, Poland, EU,
Co-authors: PIĄTKOWSKI Jarosław
Abstract: In paper authors present the influence of adjusting key parameter, which is changeover point between first and second phase, on quality of casting from AlSi9Cu3(Fe) alloy. Technological tests were carried out in industrial conditions on a machine with a clamping force of 1200 Mg with variable parameters of the piston operation. [..] Read more
ŠVADLENA Jan Technopark Kralupy of the University of Chemistry and Technology Prague, Kralupy nad Vltavou, Czech Republic, EU,
Co-authors: STRACHOTOVÁ Kristýna Charlotte PROŠEK Tomáš KOUŘIL Milan
Abstract: The corrosivity of indoor atmospheres is usually evaluated according to the ISO 11844-1 standard, utilizing specimens of different metals. However, the sensitivity of this setup is not sufficient to the presence of specific organic pollutants, such as acetic and formic acid or formaldehyde. [..] Read more
ZIMINA Mariia Research Center Rez (CVR), Ltd., Hlavní 130, 25600, Husinec, Czech Republic, EU,
Co-authors: VÍT Jan
Abstract: Commercial Nickel 201 alloy is widely used as a sealing material in applications under extreme temperatures and pressures. This study was designed to confirm the ability of the alloy to recover after annealing in a short time. [..] Read more
AMDUR Alexei Ural State Mining University, Yekaterinburg, Russian Federation,,
Co-authors: FEDOROV Sergei PAVLOV Valery
Abstract: The extraction of platinum from sulphide copper-nickel ores is a multi-stage process, which includes the melting of the prepared concentrate in electric ore smelting furnaces. In these furnaces, the melt is divided into matte and slag. [..] Read more
WA KALENGA Michel Kalenga Department of Metallurgy, Faculty of Engineering and Built Environment, University of Johannesburg, Doornfontein, South Africa,,
Co-authors: NYEMBWE Didier Kasongo TANGSTAD Merete
Abstract: During the production of high carbon ferromanganese, the feed undergoes different stages of reduction. Three main zones were assumed instead of traditional four. [..] Read more
WA KALENGA Michel Kalenga Department of metallurgy, School of mining, metallurgy and chemical engineering, Faculty of Engineering and Built Environment, University of Johannesburg, Doornfontein, South Africa,
Co-authors: NTULI Joy
Abstract: South Africa is amongst the influential producers of gold worldwide. Many results have been published on its ores and different parameters defined. [..] Read more
WA KALENGA Michel Kalenga Department of metallurgy, School of mining, metallurgy and chemical engineering, Faculty of Engineering and Built Environment, University of Johannesburg, Doornfontein, South Africa,
Co-authors: THUNKA Motshoea NYEMBWE Didier Kasongo
Abstract: The depletion of ores from the first sources on one hand has led to using damped materials that contain valuable metals to be recycled while environmental threats are being targeted and on the other hand high price of reductant coupled with their depletion have caused a stir in the metallurgical industry. Many slags are currently recycled for the recovery of valuable metals while new reductants are being tested for eventually replace the generic reductants. [..] Read more
Kolesnikov Artem V. D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia,
Co-authors: Davydkova Tatiana V.
Abstract: In the course of the work, a resource-saving version of the work of all basic elements was developed. The developed technological scheme will allow wastewater to be treated to modern maximum permissible concentrations (MPC) standards due to the highly efficient removal of heavy and non-ferrous metals and organic impurities, which can significantly reduce the cost of water supply to the enterprise.. [..] Read more
MISIRLI Mustafa Mechanical Engineering Department, Ozyegin University, Istanbul, Turkey,,,
Co-authors: HOSSEINZADEH Ali YAPICI Guney Guven
Abstract: In the current study the effects of conventional aging and stress aging on the microstructure and mechanical behavior of warm rolled AZ31 magnesium alloy were investigated. Tensile experiments revealed that the ultimate tensile strength (UTS) of the as-received AZ31 increased up to 300 MPa after 24 h aging at 120 °C, with a 2% reduction in ductility. [..] Read more
SKOTNICOVÁ Kateřina VSB – Technical University of Ostrava, Faculty of Materials Science and Technology, 70800 Ostrava, Czech Republic, EU,
Co-authors: KOLCHUGINA Natalia B. BURKHANOV Gennady S. ČEGAN Tomáš KURSA Miroslav LUKIN Alexander A. ŽIVOTSKÝ Ondřej PROKOFEV Pavel A. DORMIDONTOV Nikolay A. JUŘICA Jan
Abstract: The focusing of new technologies on the formation of inhomogeneous distributions of heavy rare-earth metals (REMs) in hard magnetic Nd-Fe-B materials is of scientific importance for increasing their functional properties, along with preserving existing sources of heavy REMs. The manufacturing process for these materials includes strip-casting, hydrogen decrepitation, and treatments in a hydrogen atmosphere, as well as high-energy milling combined with mechanical alloying of multicomponent powder mixtures. [..] Read more
KHOJIEV Shokhrukh Toshpulatovich Department of Mining and Metallurgy, Tashkent State Technical University, Tashkent, Uzbekistan,,,,,
Co-authors: MATKARIMOV Sokhibjon Turdalievich NARKULOVA Etibor Tukhtaboy kizi MATKARIMOV Zaynobiddin Turdalievich YULDASHEVA Nasiba Saidakhmatovna
Abstract: The study relates to the processing of zinc-containing wastes of metallurgical production using products of joint pyrolysis of polyethylene wastes and wood pods. The process is carried out in two stages: preparation of polyethylene waste for the operation and then the recovery process. [..] Read more
HUGO Marta BENEŠ a LÁT, a. s., Poříčany, Czech Republic, EU,,
Co-authors: LUŇÁK Milan VÍTKOVÁ Jana MICHNA Štefan
Abstract: In this time many suppliers are existed with raw material for foundry and the same as a minimum number has difficult task of choosing the most suitable one. How we can search the best of them for us? It is hard question. [..] Read more
KUDRNA Lukáš VSB - Technical University of Ostrava, Department of Production Machines and Design, Ostrava, Czech Republic, EU,,
Abstract: This article deals with the chemical composition of the engine part mounted on the historical motorcycle JAWA 250 from 1939. Before the company started making motorcycles, it was engaged in the production of firearms. [..] Read more
Scroll to Top