Conference Proceedings
                    - METAL 2022
METAL - International Conference on Metallurgy and Materials

Conference Proceedings - METAL 2022

31st International Conference on Metallurgy and Materials
May 18 - 19, 2022 / Orea Congress Hotel Brno, Czech Republic, EU
ISSN: 2694-9296
ISBN: 978-80-88365-06-8
Proceedings of the conference have already been published in Scopus and we are waiting for evaluation and potential indexing in Web of Science.

The 31st International Conference on Metallurgy and Materials METAL 2022 took place in Brno on May 18 - 19, 2022. 200 participants from 20 countries listened to 77 lectures and viewed 83 posters. After a two-year break caused by the coronavirus pandemic, the conference could take place this year in the traditional format again.

The conference was opened by Professor Ping. Xiao, who holds the Rolls-Royce/Royal Academy of Engineering Research Chair in Advanced Coating Technology. He dedicated his lecture to the topic of surface engineering and coatings for aero-engine applications. The second plenary lecture was given by Assoc. Prof. Mariola Saternus from the Silesian University of Technology in Kawovice. The lecture dealt with the synergistic effect of the optimal of AlNi addition to the zinc bath as an alternative to the baths containing Pb, Bi and Sn.

However, the thematic scope of the conference lectures was traditionally much broader. Researchers presented innovations not only in the fields of advanced iron, cast iron, steelmaking, non-ferrous metals and alloys, metal forming and surface engineering, but also in the economics and management of metallurgical production.

The program also included a commercial presentation by TestForce Ltd. which presented the steps to an optimized and automated lab.

The prize for the best poster has been awarded to Dušan Majtás from the Institute of Theoretical and Applied Mechanics of the Academy of Sciences of the Czech Republic. In his work, he showed the corrosion of lead and copper coupons and comparison of ageing simulation and real exposure.

The next 32nd METAL conference will take place on May 16 - 19, 2023.

Read more
MŁYNARCZYK Piotr Kielce University of Technology, Poland, EU,,,,,
Co-authors: BAŃKOWSKI Damian SPADŁO Sławomir ZIARKOWSKI Piotr GRZĘDA Jarosław
Abstract: In this article, the non-destructive testing of alnico alloys was carried out by various methods. Paper provides and researches about non-destructive testing (NDT) methods. [..] Read more
PETRÁŠ Roman Research Centre Řež, Husinec-Řež, Czech Republic, EU,
Co-authors: KUNZOVÁ Klára CHOCHOLOUŠEK Michal ŠPIRIT Zbyněk VÁLA Ladislav
Abstract: During the operation of fusion devices, the plasma facing components are exposed to high thermal loads from the plasma resulting in mechanical stress formation, as well as to electromagnetic forces and severe particle fluxes. Materials used for this application have to sustain demanding operational conditions. [..] Read more
REJKOVÁ Jana UCT - University of Chemistry and Technology, Prague, Czech Republic, EU,,
Co-authors: KUDRNOVÁ Marie
Abstract: The use of salt mixtures properties is considered in many future technologies, such as energy storage or medium for nuclear reactors. The key question is to choose a suitable construction material for these devices operating at high temperatures in a corrosive environment. [..] Read more
RIGOULET Hana VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,
Co-authors: DRÁPALA Jaromír BROŽOVÁ Silvie LANGOVÁ Šárka VONTOROVÁ Jiřina KUBÁČ Jaroslav JANÁČEK Dominik
Abstract: The paper deals with the possibility of obtaining zinc from waste galvanic sludge, which arises during galvanic plating. Galvanic sludges, which contain significant amounts of heavy metals, form waste suitable for hydrometallurgical recycling. [..] Read more
RONČÁK Ján Institute of Scientific Instruments of the CAS, Brno, Czech Republic, EU,
Co-authors: ADAM Ondřej MÜLLER Peter ZOBAČ Martin
Abstract: Eutectic high-entropy alloys have become a significantly studied type of material due to their combination of strength and ductility. However, previous research has focused primarily on manufacture, solidification behaviour and mechanical properties. [..] Read more
SLOKAR BENIĆ Ljerka University of Zagreb, Faculty of Metallurgy, Sisak, Republic of Croatia, EU,,
Co-authors: KOMLJENOVIĆ Luka ERMAN Žiga JAJČINOVIĆ Magdalena
Abstract: Titanium and titanium alloys have been widely used in medicine as implant materials for the last 50 years. The reason for this could be found in a unique combination of biocompatibility and strength of these alloys. [..] Read more
SOCHA Ladislav Institute of Technology and Business in České Budějovice, České Budějovice, Czech Republic, EU,,,
Co-authors: PRÁŠIL Tomáš GRYC Karel SVIŽELOVÁ Jana NOVÁČEK Petr
Abstract: This paper deals with approximate physical modelling of aluminum melt degassing, performed under low-pressure die casting conditions of aluminum castings. The modelling took place on an aquatic physical model on a 1:1 scale to the operating conditions, constructed in the laboratories of ITB in ČB. [..] Read more
VAŠÁKOVÁ Kristýna Brno University of Technology, Institute of Materials Science and Engineering, Brno, Czech Republic, EU,,
Co-authors: PANTĚLEJEV Libor KOUTNÝ Daniel
Abstract: The AlSi9Cu3 alloy, conventionally produced by High-Pressure Die Casting (HPDC), is extensively used in the automotive industry for its high specific strength, good heat and electric conductivity. There is currently an effort to produce this alloy using selective laser melting technology (SLM) due to design possibilities such as producing geometrically complex and lightweight products. [..] Read more
KOLOŠ Pavel Moravian Business College Olomouc, Olomouc, Czech Republic, EU,,
Co-authors: WICHER Pavel LENORT Radim CHYTILOVÁ Ekaterina PAWLICZEK Adam
Abstract: The aim of the paper is to analyze and describe current knowledge and application of agile methods, tools and techniques in foundries in Czech and Slovakian foundries. The motivation of the research is increasing need of customer-focused management and competitiveness. [..] Read more
HUBATKA Slavomír TUKE - Technical University of Košice, Košice, Slovakia, EU,
Co-authors: BUĽKO Branislav BARICOVÁ Dana DEMETER Peter FOGARAŠ Lukáš
Abstract: In recent years, global and domestic market demands for quality steel were on the increase. Combined with the strict legislation of the European Union and its ambitious plan to reach carbon neutrality by 2050, this created pressure in the metallurgical sector, necessitating innovation and optimization of its current processes. [..] Read more
MARTÍNEK Zdeněk VSB – Technical University of Ostrava, Ostrava, Czech Republic, EU,,
Co-authors: BESTA Petr NĚMCOVÁ Nikola
Abstract: The aim of the manufacturing company is not only to innovate the production process in order to reduce production costs on the one hand and increase production on the other, but also to increase the resulting quality of products, which, with an increasing the level of quality of manufactured products, eliminates the costs associated with complaints (if any), increases the competitiveness of the manufacturing company in the markets and brings higher demand for products due to higher quality. This innovation of improving the quality of products has been neglected to a large extent in current trends, as great emphasis is placed on increasing productivity while reducing costs, and even brings with it the opposite effect, which is the above-mentioned costs of complaints and the associated outflow of customers. [..] Read more
CONSTANTINESCU Dan University Politehnica of Bucharest, Bucharest, Romania, EU,
Co-authors: CARLAN-SERBAN Beatrice
Abstract: The metallurgy includes the oldest branch of technology and science of the humanity. Connected to this, the evolution of the technical installation, thermal or mechanical, has followed a similar impressing path. [..] Read more
KRÁTKÝ Jan VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,
Co-authors: MINARČÍK Jan ČAPKOVÁ Barbora SVOBODOVÁ Petra
Abstract: This work deals with the utilization of waste heat of steel plants to generate electricity, using Stirling engine. It also deals with the design and connection of Stirling engine in the stack of metallurgical plant to utilize the waste heat energy to generate electricity. [..] Read more
PETERKOVÁ Jindra Moravian Business College Olomouc, Olomouc, Czech Republic,,,
Abstract: The paper contains new knowledge about the expansion of technologies associated with Industry 4.0 and digitalization in selected companies including metallurgical companies in the Czech Republic and evaluates the intensity of business process innovation with a focus on internal processes implemented in companies. A probe was implemented which was purposefully focused on the analysis of statistical data on innovation activities in innovative companies including metallurgical companies in the Czech Republic in the period under study by. [..] Read more
BEČKA Miloslav VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,,,
Co-authors: SIRNÍK Tomáš MENŠÍK Martin BARČÁKOVÁ Ivana
Abstract: The paper deals with the processes of digitization of metallurgical processes, its possibilities and limitations caused by the specifics of these operations. Digitization is the process of introducing the use of digital technologies in various areas of production and society. [..] Read more
CZERWIŃSKA Karolina Rzeszow University of Technology, Rzeszow, Poland, EU,, ORCID ID: 000-0003-2150-0963
Co-authors: DWORNICKA Renata PACANA Andrzej
Abstract: The research objective was to diagnose aluminum gearbox castings using the proposed diagnosis methodology and pro-quality analysis. The study identified the most severe non-conformity (in terms of frequency of occurrence and its consequences) – the sandblasting within the casting base. [..] Read more
SIWIEC Dominika Rzeszow University of Technology, Rzeszow, Poland, EU,, ORCID ID: 0000-0002-6663-6621
Co-authors: DWORNICKA Renata PACANA Andrzej
Abstract: The successful management of product incompatibility remains a challenge. Therefore, the study aims to analyze the possibilities of effective management through qualitative analyses. [..] Read more
HAN Weixue VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,
Co-authors: SAMOLEJOVA Andrea YAO Wenlong WANG Wenjuan
Abstract: Based on the samples of Shanghai and Shenzhen listed companies in China's steel industry from 2015 to 2020, this paper establishes a fixed effect model to analyze the influence of heterogeneous human capital on enterprise value. The results show that the knowledge-based human capital has less positive impact on the enterprise value of steel enterprises, but the technology-based human capital has a significant impact on them. [..] Read more
LESHCHENKO Kateryna ,2,3 VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Abstract: The iron and steel industry plays an important role as a supplier to many other industries on an international scale. Given the strong dependence of economies on its products, maintaining its sustainability is essential. [..] Read more
SIRNÍK Tomáš VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU,,,
Co-authors: BEČKA Miloslav DVORSKÝ Michal ŠVEC Pavel
Abstract: The paper deals with the application of automatically controlled vehicles in the metallurgical industry. The aim of the paper is to present a proposal for innovative safety of operating workers in the vicinity of an automatically controlled fire truck during the production of coke. [..] Read more
Scroll to Top