Proceedings
Back
Conference Proceedings - METAL 2018
27th International Conference on Metallurgy and Materials
May 23rd - 25th 2018 / Hotel Voronez I, Brno, Czech Republic, EU
www.metalconference.eu
ISSN: 2694-9296
ISBN: 978-80-87294-84-0
Proceedings of the conference were published in Web of Science and Scopus.
Read
more
Past events
Table of Contents
Download
INGALDI Manuela Czestochowa University of Technology, Faculty of Management, al. Armii Krajowej 19b p.309z, 2-200 Czestochowa, Poland, manuela@gazeta.pl
Co-authors:
DZIUBA Szymon T.
Abstract:
One of the most frequently used methods of quality management in manufacturing and industrial enterprises is the FMEA method. The FMEA (i.e. [..]
Read more
KARDAS Edyta Czestochowa University of Technology, Czestochowa, Faculty of Production Engineering and Materials Technology, Poland, EU, email: ekonstan@wip.pcz.pl
Abstract:
The main purpose of the paper is the determination of basic causes of non-conformances of anodised coating on aluminium finishing strips. Results of the analysis allow to identify factors that should be paid special attention during the production process. [..]
Read more
KONSTANCIAK Anna Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, al. Armii Krajowej 19b, 42-200 Czestochowa, Poland, konstanciak.anna@wip.pcz.pl
Abstract:
Sustainable development concept assumes appropriately and consciously configured relationship between economic growth, environmental care and quality of life. When a large exploitation of natural resources and emerging waste, the problem of the waste utilization became an important thing. [..]
Read more
KRAMARZ Marzena Silesian University of Technology, Gliwice, Poland, PL, mkramarz@polsl.pl
Co-authors:
KRAMARZ Włodzimierz
HERMAN Damian
Abstract:
The identification and assessment of the frequency and the power of the influence as well as the results of disruptions, are essential problems noticed both by practitioners and theoreticians of flow management in supply chains. They are part of a widely discussed problem of the resilience of a supply chain. [..]
Read more
KULIŃSKA Ewa Opole University of Technology, Faculty of Production Engineering and Logistics, Opole, Poland, EU, e.kulinska@po.opole.pl, d.maslowski@po.opole.pl, m.dendera-gruszka@po.opole.pl
Co-authors:
MASŁOWSKI Dariusz
DENDERA-GRUSZKA Małgorzata
PIFCZYK Damian
Abstract:
The article presents a method of defining costs of a gradual shaft production process using FlexSim simulation software. One of the key concepts used in the article is a computer simulation, which is necessary for the efficient and quick implementation of this type of research. [..]
Read more
KUTÁČ Josef VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, josef.kutac@vsb.cz, tomas.kutac@vsb.cz, petr.besta@vsb.cz, eva.svecova@vsb.cz
Co-authors:
KUTÁČ Tomáš
BESTA Petr
ŠVECOVÁ Eva
Abstract:
This article identifies requirements and conditions for choosing and implementation of appropriate information system for production tracking and evidence in company producing tubular products. The article defines topic of optimal customization of production tracking information system taking into consideration: type of production machine, detail of production tracking, type of tracked data, interval of tracking, reporting requirements and technological possibilities for production tracking. [..]
Read more
ŁYP-WROŃSKA Katarzyna AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Kraków, Poland, UE klyp@agh.edu.plklyp@agh.edu.pl
Co-authors:
WOLNIAK Radosław
SUŁKOWSKI Marcin
Abstract:
The publication presents the most important quality determinants in the metalworking industry. It discusses the structure of processes involved in the technology of metals. [..]
Read more
MASŁOWSKI Dariusz Opole University of Technology, Faculty of Production Engineering and Logistics, Opole, Poland, EU, 1 d.maslowski@po.opole.pl, e.kulinska@po.opole.pl
Co-authors:
KULIŃSKA Ewa
Abstract:
The paper presents the analysis of the application of FMEA method of storage system in the area of a metallurgical enterprise performing gray iron castings according to the PN-EN 1561: 2000 and PN-92 / H-83101 standards as well as alloy cast iron. Casting is a technology for making objects by filling molds with liquid metal. [..]
Read more
MICHLOWICZ Edward AGH University of Science and Technology, Krakow, Poland, EU, michlowi@agh.edu.pl, ksmol@agh.edu.pl
Co-authors:
SMOLINSKA Katarzyna
Abstract:
In addition to meeting customer requirements and maintaining competitiveness, enterprises must now include social responsibility in their strategy, with particular emphasis on ecology. This trend is partly forced by changes in environmental protection regulations, including waste management. [..]
Read more
NĚMEC Tomas VSB - Technical University of Ostrava, Faculty of metallurgy and materials engineering, Ostrava, Czech Republic, EU, tomas.nemec.st1@vsb.cz
Co-authors:
NÉTEK Vaclav
MYNÁŘ Martin
Abstract:
The article deals with the issue of resources needed for the development of competitiveness in Czech manufacturers based on the increasing level of complexity within closed technological chains. The authors base their results on research which showed that primary manufacturers of raw resources export semi-finished products to long distances with a low total added value. The selected sample of manufacturers that produce rolled and drawn wires from steel and nonferrous metals showed that the primary intake are materials imported largely from countries outside the European Union. [..]
Read more
DLUHOŠOVÁ Dana VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, dana.dluhosova@vsb.cz, barbora.ptackova@vsb.cz, dagmar.richtarova@vsb.cz
Co-authors:
PTÁČKOVÁ Barbora
RICHTAROVÁ Dagmar
Abstract:
This paper is dedicated to financial performance evaluation of metallurgy industry of the Czech Republic. Financial performance of the industry or company is a random process, which can be decomposed into the particular indicators. [..]
Read more
RATAJCZAK Marcin Warsaw University of Life Sciences, Warsaw, Poland, EU, marcin_ratajczak@sggw.pl, tomasz_rokicki@sggw.pl
Co-authors:
ROKICKI Tomasz
Abstract:
The aim of the article is to present selected actions taken in the field of natural environment as an important area of corporate social responsibility by enterprises from the metallurgical industry in Poland (division into steel, copper, zinc and lead producers). Analysis was carried out in the field of environmental policy, areas of impact on the natural environment and reduction of consumption of materials, raw materials, fuel, energy and water in the surveyed companies. [..]
Read more
ROKICKI Tomasz Warsaw University of Life Sciences, Warsaw, Poland, tomasz_rokicki@sggw.pl; marcin_ratajczak@sggw.pl
Co-authors:
RATAJCZAK Marcin
Abstract:
The aim of this article is to present the directions of steel consumption in Poland, and to show the impact of economic conditions on this distribution. The study covered the period from 2006 to 2016. [..]
Read more
SANIUK Sebastian University of Zielona Góra, Faculty of Economics and Management, Zielona Góra, Poland, EU, s.saniuk@wez.uz.zgora.pl
Co-authors:
GRACZYK Magdalena
SANIUK Anna
Abstract:
The new Industry 4.0 concept gives new development opportunities to large enterprises. It allows you to build a competitive advantage in the market and significantly increases their competitiveness. [..]
Read more
SIKOROVÁ Andrea VSB - Technical University of Ostrava, Ostrava, Faculty of metallurgy and materials engineering, Czech Republic, EU, andrea.sikorova@vsb.cz, martin.lampa@vsb.cz, andrea.samolejova@vsb.cz
Co-authors:
LAMPA Martin
SAMOLEJOVÁ Andrea
DŮBRAVOVÁ Petra
Abstract:
The paper describes an analysis of storing and inventory management in a metallurgical company and proposes actions for the improvement of the current situation. Methods of ABC and XYZ analysis according to the preliminary determined criteria are used for the evaluation of inventory management. [..]
Read more
VILAMOVÁ Šárka VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU, sarka.vilamova@vsb.cz, roman.smelik.st@vsb.cz, adam.levit@vsb.cz, anezka.podlasova.st@vsb.cz, petr.sikyr.st@vsb.cz
Co-authors:
SMELIK Roman
LEVIT Adam
PODLASOVÁ Anežka
ŠIKÝŘ Petr
Abstract:
At present, the Tetra Pak waste cartons are brought to be disposed of in well technologically equipped paper mills, where they are pulverized. The fibre is then used in the production of recycled paper and the sandwich press of polyethylene and aluminium foil is then transported to a landfill or to an incinerator. [..]
Read more
VOZŇÁKOVÁ Iveta VSB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic, EU, iveta.voznakova@vsb.cz
Abstract:
Possibilities of the use of alternative drives from the point of view of operation of an industrial enterprise are at present almost unlimited, and it will always depend on concrete conditions of the company to which measure the company will decide to use alternative fuels in its fleet. One of the main arguments for using of alternative motor fuels are ecological reasons. [..]
Read more
WICHER Pavel VSB - Technical University of Ostrava, Faculty of metallurgy and materials engineering, Ostrava, Czech Republic, EU, pavel.wicher@vsb.cz
Co-authors:
ČECH Martin
LENORT Radim
MALČIC Tomáš
Abstract:
The logistics processes in metallurgical enterprises can be characterized by the high complexity resulting from long production cycles, wide product portfolio, decreasing volume of individual orders and considerable product dimensions. During the historical development of most metallurgical enterprises, a continuous system of logistics processes improvement was not implemented, thanks to which they would be optimized due to the changing conditions of the industry. [..]
Read more
WNĘK Mariusz Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, Department of Industrial Informatics, Katowice, Poland, EU, mariusz.wnek@polsl.pl
Abstract:
Almost every day, from different information source, we can hear about problems dealing with CO2 emission and its impact on environment and us - people. A few sources from which CO2 is emitted can be pointed out but this paper focuses on metallurgical industry. [..]
Read more
WOJTYNEK Lilianna Opole University of Technology, Opole, Poland, EU, l.wojtynek@po.opole.pl, r.budzik@po.opole.pl, e.kulinska@po.opole.pl
Co-authors:
BUDZIK Ryszard
KULIŃSKA Ewa
Abstract:
The paper presents the current state of metal recycling. The types of metals subjected to the recycling process and the course of the process are described. [..]
Read more